• İKİTELLİ OSB ÇORAPÇILAR SAN SİT D BLOK NO:15-16 BAŞAKŞEHİR \ İSTANBUL
  • +90 212 485 25 05
    info@zegamak.com
manufacture-image
  • – Long, separable and volume adjustable work chamber
    – Usually for long and large pieces
    – Various volumes in the range of 20lt – 550lt
    – Without seperating system
    – Deburring and polishing for all kinds of metal and non-metal materials
    – Suitable for automation system
    – Optional accessories

ZTV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering and aging processes for metal or non-metal materials.

 

The machines in this series are generally suitable for sensitive parts with long dimensions and the processed parts are collected manually by the staff at the end of the process.

 

Adjustable volume separators can be installed on the inside of the chamber at the desired distance compatible with the part dimensions. This feature allows you to process parts of different types and sizes in one machine at the same time.

 

Chamber design, vibration quality and kneading performance are important factors in order to achieve the desired surface quality in a minimum process time.

 

The trough type chamber is made of special steel and has a tension-free and vibration-resistant welding structure.

 

Thanks to ergonomically designed chassis height and springs, staff can work efficiently.

 

Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are also some distinctive design features of the machine chassis.

 

Long-lasting special lubrication free motor series which have CE and Ex standards, high performance, cast-bodied and hollow roller bearings is used.

 

Inner part of the chamber is covered with 90 Shore polyurethane material which is resistant to abrasion. In this way, a long service life is achieved without requiring repair and maintenance.

 

Our machines have a chip unloading section that is easy to open and close.

 

Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used.

Optionally, dosing pump control, speed control unit, valve control unit and similar accessories can be added to the electrical panel. It can work integrated with automation systems with PLC software.

 

There are clean water inlet and waste water discharge valves. If preferred, standard water valves can be replaced as solenoid valves. In this case, valve on-off control can be done from the electrical panel.

The dosing pump mounted on the machine is installed as standard. The dosing pump automatically sprays the chemicals used in the process in desired periods.

Resimler

Ürün Dökümanları

Lorem Ipsum, dizgi ve baskı endüstrisinde kullanılan mıgır metinlerdir. Lorem Ipsum, adı bilinmeyen bir matbaacının bir hurufat numune kitabı oluşturmak üzere bir yazı galerisini alarak karıştırdığı 1500’lerden beri endüstri standardı sahte metinler olarak kullanılmıştır.

Lorem Ipsum, dizgi ve baskı endüstrisinde kullanılan mıgır metinlerdir. Lorem Ipsum, adı bilinmeyen bir matbaacının bir hurufat numune kitabı oluşturmak üzere bir yazı galerisini alarak karıştırdığı 1500’lerden beri endüstri standardı sahte metinler olarak kullanılmıştır.

Sohbeti Başlat
Bize Mesaj Bırakın
Merhaba,
Daha fazla bilgi almak istiyorum.